BC Tight grout

Product Description:-

BC Tight grout is a two part pre-weighed polyester resin based grout

After setting, this grout yields consistent physical properties like compressive strength, shear strength etc and it can be used where the annulus space is between 1O and 40mm BC Tight grout is fast setting, and it rapidly achieves load bearing and bond strength.

BC Tight grout - OH is designed toave thixotropic consistency meant for overhead applications.

Mixing:

A complete pack of resin and catalysed filler should be mixed in one operation. Mixing may be carried out manually or mechanically

When a smooth, even consistency is achieved the grout is ready for use and should be placed well within the gel time

Packs have been designed to produce practical and economic volumes of grout.

Installation:

Using the calculated volume of grout based on Table 1, the grout should be poured steadily into

the prepared holes. The anchor bar is then pressed into the hole to the required depth Slight agitation of the bar will assist in achieving a complete bond.